As I have discussed in the last couple of posts my intent is to use magnets and dowels to pin the terrain to the modules of my micro RC race track. The initial inspiration for this system came from user ‘Healzonu’ on the Ultimate RC Forums and I have developed the concept further for use on my track. For those playing along at home, this is how you make the hole array for the first time in four easy steps.
Tools And Equipment
To do this you will need:
- Two B1 sized plots/prints of the hole pattern template (see the printables page). You can do this with only one print if you want as the B1 layout only covers half of a module. You will have to flip it around to do the second half if you only use one print.
- A drill.
- A drill bit corresponding the the size dowels/magnets you are intending to use. I actually used a 1/4″ bit for 6mm magnets to make the hole just slightly oversized.
- Tape. Masking tape is best but almost any will do.